EAN: 8592765023087
Isolators Ex9I125 can be used as a main switch in wide variety of applications. These switches are tested according to IEC / EN 60947-3 standards and also fulfill the requirements for the isolation functionality. Utilization category AC-22A ensures possibility of switching mixed resistive and inductive loads with low overloads with cos ϕ = 0.65. Subcategory A allows frequent operation. Isolators of line Ex9I125 are produced in modular design with one module unit width per pole. Can be connected via standard busbars of both fork as well as pin type of connection.
Paremeter | Value |
---|---|
Switching function | Off switch |
Number of normally open contacts | 2 |
Rated switching capacity | 0.64 |
Short-circuit breaking capacity (Icw) | 0.30 |
Degree of protection (IP) | IP20 |
Forced segregation (according to DIN VDE 0113) | YES |
Number of normally closed contacts | 0 |
Number of poles | 2 |
Nominal rated current | 25 |
Nominal rated voltage | 400 |
Voltage type | AC |
With signal lamp | NO |
Colour calotte | Grey |
Built-in depth | 80 |
Number of change-over contacts | 0 |
Width in number of modular spacings | 2 |
Document Type | Document Name | Size | Format |
---|---|---|---|
Mounting instruction Ex9I125 | 1.3mb | ||
Declarations of Conformity Ex9I125 | 0.5mb | ||
Datasheet Ex9I125 | 0.8mb | ||
Catalogue Installation Devices | 0.0gb | PDF WEB |