100881 Isolator Ex9I125 4P 40A

EAN: 8592765008824

Isolators Ex9I125 can be used as a main switch in wide variety of applications. These switches are tested according to IEC / EN 60947-3 standards and also fulfill the requirements for the isolation functionality. Utilization category AC-22A ensures possibility of switching mixed resistive and inductive loads with low overloads with cos ϕ = 0.65. Subcategory A allows frequent operation. Isolators of line Ex9I125 are produced in modular design with one module unit width per pole. Can be connected via standard busbars of both fork as well as pin type of connection.

Characteristics

Paremeter Value
Switching function Off switch
Number of normally open contacts 4
Rated switching capacity 1.26
Short-circuit breaking capacity (Icw) 0.48
Forced segregation (according to DIN VDE 0113) YES
Degree of protection (IP) IP20
Nominal rated voltage 400
Voltage type AC
With signal lamp NO
Colour calotte Grey
Number of normally closed contacts 0
Number of poles 4
Nominal rated current 40
Built-in depth 80
Number of change-over contacts 0
Width in number of modular spacings 4

Documents

Document Type Document Name Size Format
Uputstvo Instrukcije za montažu Ex9I125 1.3mb PDF
Izjava o sukladnosti Potvrda o usklađenosti Ex9I125 0.2mb PDF
Tehnički dokument Tehnički podaci Ex9I125 0.8mb PDF
Katalog Katalog Instalacijski-modularni Uređaji 0.0gb PDF WEB